super bright round type led lamps doc. no : qw0905- rev. : date : data sheet LUR3630-PF ligitek electronics co.,ltd. property of ligitek only 12 - may - 2007 a LUR3630-PF lead-free parts pb
note : 1.all dimension are in millimeter tolerance is 0.25mm unless otherwise noted. 2.specifications are subject to change without notice. directivity radiation package dimensions part no. LUR3630-PF + - ligitek electronics co.,ltd. property of ligitek only page 1/5 50% 75% 100% -60 -30 25%025%50%75%100% 0 60 30 0.5 typ 25.0min 2.54typ 1.0min 1.5max 2.0 13.5 10.0 11.0
red diffused page ligitek electronics co.,ltd. property of ligitek only 2/5 unit ur ratings ma ma 40 120 a 10 -40 ~ +85 -40 ~ +100 120 mw typ. min. max. luminous intensity @20ma(mcd) min. 20 spectral halfwidth nm peak wave length pnm forward voltage @ ma(v) 42 550 350 2.4 1.5 20 660 viewing angle 2 1/2 (deg) symbol parameter i f i fp forward current peak forward current duty 1/10@10khz ir t opr operating temperature reverse current @5v storage temperature tstg power dissipationpd color lens emitted part nomaterial red gaalas LUR3630-PF typical electrical & optical characteristics (ta=25 ) absolute maximum ratings at ta=25 note : 1.the forward voltage data did not including 0.1v testing tolerance. 2. the luminous intensity data did not including 15% testing tolerance. part no. LUR3630-PF
ligitek electronics co.,ltd. property of ligitek only 0.0 0.8 f o r w a r d v o l t a g e @ 2 0 m a n o r m a l i z e @ 2 5 r e l a t i v e i n t e n s i t y @ 2 0 m a n o r m a l i z e @ 2 5 wavelength (nm) ambient temperature( ) fig.5 relative intensity vs. wavelength r e l a t i v e i n t e n s i t y @ 2 0 m a 1.0 0.0 600 0.5 -40-20 650700750 -40 80 20 04060100 ambient temperature( ) -20040 20100 80 60 1 f o r w a r d c u r r e n t ( m a ) r e l a t i v e i n t e n s i t y n o r m a l i z e @ 2 0 m a fig.3 forward voltage vs. temperature 0.9 1.0 1.1 1.2 0 1 1.0 1.0 0.5 1.5 2.0 2.5 3.0 1 fig.4 relative intensity vs. temperature forward voltage(v) 3.0 2.04.0 0.0 5.0 0.5 forward current(ma) 100 101000 fig.1 forward current vs. forward voltage typical electro-optical characteristics curve 10 100 1000 ur chip fig.2 relative intensity vs. forward current 2.5 1.5 1.0 2.0 3.0 page3/5 part no. LUR3630-PF
ligitek electronics co.,ltd. property of ligitek only soldering condition(pb-free) 1.iron: soldering iron:30w max temperature 350 c max soldering time:3 seconds max(one time only) distance:2mm min(from solder joint to body) note:1.wave solder should not be made more than one time. 2.you can just only select one of the soldering conditions as above. dip soldering preheat: 120 c max preheat time: 120seconds max ramp-up 2 c/sec(max) ramp-down:-5 c/sec(max) solder bath:260 c max dipping time:3 seconds max distance:2mm min(from solder joint to body) 25 0 0 120 2 /sec max preheat 100 260 temp( c) 2.wave soldering profile 5 /sec max time(sec) 200 250 260 c3sec max page 4/5 120 seconds max part no. LUR3630-PF
mil-std-202: 210a mil-std-750: 2031 jis c 7021: a-1 this test intended to determine the thermal characteristic resistance of the device to sudden exposures at extreme changes in temperature when soldering the lead wire. solder resistance test 1.t.sol=260 5 2.dwell time= 10 1sec. this test intended to see soldering well performed or not. solderability test 1.t.sol=230 5 2.dwell time=5 1sec mil-std-202: 208d mil-std-750: 2026 mil-std-883: 2003 jis c 7021: a-2 ligitek electronics co.,ltd. property of ligitek only the purpose of this is the resistance of the device which is laid under condition of high temperature for hours. the purpose of this is the resistance of the device which is laid under condition of low temperature for hours. this test is conducted for the purpose of detemining the resistance of a part in electrical and themal stressed. the purpose of this test is the resistance of the device under tropical for hours. the purpose of this is the resistance of the device to sudden extreme changes in high and low temperature. 1.under room temperature 2.if=20ma 3.t=1000 hrs (-24hrs, +72hrs) operating life test high temperature storage test low temperature storage test high temperature high humidity test thermal shock test 1.ta=105 5 &-40 5 (10min) (10min) 2.total 10 cycles 1.ta=65 5 2.rh=90%~95% 3.t=240hrs 2hrs 1.ta=105 5 2.t=1000 hrs (-24hrs, +72hrs) 1.ta=-40 5 2.t=1000 hrs (-24hrs, +72hrs) reliability test: test itemtest condition description mil-std-750: 1026 mil-std-883: 1005 jis c 7021: b-1 mil-std-202: 107d mil-std-750: 1051 mil-std-883: 1011 mil-std-202:103b jis c 7021: b-11 mil-std-883:1008 jis c 7021: b-10 jis c 7021: b-12 page 5/5 reference standard part no. LUR3630-PF
|
